* [libre-riscv-dev] [Bug 311] countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 13:18 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-311-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=311
--- Comment #3 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
tobias i added this in:
https://git.libre-soc.org/?p=soc.git;a=blob;f=src/soc/logical/main_stage.py;h=76be8a6404b1648de20f10dc8a933b6c586d5a1c;hb=HEAD
next i'll put in a unit test into logical/test_pipe_caller.py
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] daily kan-ban update 15may2020
From: Luke Kenneth Casson Leighton @ 2020-05-15 12:05 UTC (permalink / raw)
To: Libre-RISCV General Development
yesterday, again, tried fixing the FSM for LD/ST Comp Unit. several
hours and i was able to get ST to work but not LD. or LD but not
update-mode.
this is getting very irritating and i need help with it: i am not
suited to doing complex time-dependent FSMs.
by contrast helping michael with the ALUs we made great progress, i
added popcount (tested), and parity (untested).
this morning, i am (still) on a call with MarketNext, and also
reviewed tobias's countzero conversion. i will spend more time on the
LD/ST Comp Unit FSM later.
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 311] countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 11:43 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-311-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=311
--- Comment #2 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
i *think* this fixes it:
--- a/src/soc/countzero/countzero.py
+++ b/src/soc/countzero/countzero.py
@@ -53,14 +53,14 @@ class ZeroCounter(Elaboratable):
with m.Else():
m.d.comb += ret.eq(3)
with m.Else():
- with m.If(v[0]):
- m.d.comb += ret.eq(0)
- with m.Elif(v[1]):
- m.d.comb += ret.eq(1)
+ with m.If(v[3]):
+ m.d.comb += ret.eq(3)
with m.Elif(v[2]):
m.d.comb += ret.eq(2)
+ with m.Elif(v[1]):
+ m.d.comb += ret.eq(1)
with m.Else():
- m.d.comb += ret.eq(3)
+ m.d.comb += ret.eq(0)
return ret
r = IntermediateResult()
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 311] countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 11:34 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-311-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=311
--- Comment #1 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
hm i don't think the count_right functionality is working correctly. it
appears to count from the left up to the last 1, i.e. it returns
(64-countleftzeros)
this is count leading zeros:
* cntlzd. RA,RS (Rc=1)
n <- 0
do while n < 64
if (RS)[n] = 1 then
leave
n <- n + 1
RA <- n
and this is count trailing zeros:
* cnttzd. RA,RS (Rc=1)
n <- 0
do while n < 64
if (RS)[63-n] = 0b1 then
leave
n <- n + 1
RA <- EXTZ64(n)
i am inclined to suggest that the entire input be inverted via a mux and
that encoder *not* try to do inversion.
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 311] countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 11:30 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-311-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=311
Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
Assignee|lkcl@lkcl.net |libre-soc@platen-software.d
| |e
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 311] New: countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 11:30 UTC (permalink / raw)
To: libre-riscv-dev
https://bugs.libre-soc.org/show_bug.cgi?id=311
Bug ID: 311
Summary: countzero function for Logic Pipeline
Product: Libre-SOC's first SoC
Version: unspecified
Hardware: PC
OS: Mac OS
Status: CONFIRMED
Severity: enhancement
Priority: ---
Component: Source Code
Assignee: lkcl@lkcl.net
Reporter: lkcl@lkcl.net
CC: libre-riscv-dev@lists.libre-riscv.org
NLnet milestone: ---
https://github.com/antonblanchard/microwatt/blob/master/countzero.vhdl
https://git.libre-soc.org/?p=soc.git;a=blob;f=src/soc/countzero/countzero.py;hb=HEAD
to be added to logical pipeline
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-15 11:19 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDwW1Vm8JmhkMv6oLKizANSYUNPjygk3VV2f7pQgBGpi0A@mail.gmail.com>
hey tobias, totally cool, the countzero unit test works! :)
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-15 10:55 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDy0WP7jxcKs_S7snEUcmsBq98nifNoha5um1fvQT-40dA@mail.gmail.com>
tobias, take note:
commit 4bca5df68e130da5d816cf0ab10182c4c1d27380 (HEAD -> master, origin/master)
Author: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Fri May 15 11:54:35 2020 +0100
make module combinatorial
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Fri, May 15, 2020 at 10:13 AM Luke Kenneth Casson Leighton
<lkcl@lkcl.net> wrote:
>
> https://git.libre-soc.org/?p=soc.git;a=commitdiff;h=HEAD
>
> remember tobias, i said do not use sync, replace that with comb on the intermediate result.
>
> apart from anything this will make the unit test a great deal simpler to write.
>
>
> l.
>
>
> On Friday, May 15, 2020, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
>>
>>
>>
>> On Friday, May 15, 2020, Tobias Platen <libre-soc@platen-software.de> wrote:
>>>
>>> I've now done the conversion of countzero.vhdl and most of the testbench.
>>
>>
>> fantastic. next step, to put it into the Logical pipeline and write a formal correctness proof (that's the bit that can receive donations!)
>>
>>
>>
>> --
>> ---
>> crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
>>
>
>
> --
> ---
> crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
>
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-15 9:13 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDym7tKFw808vv5m1+u0D-JVFZJv1vRH79pBaKcgYiaPtg@mail.gmail.com>
https://git.libre-soc.org/?p=soc.git;a=commitdiff;h=HEAD
remember tobias, i said do not use sync, replace that with comb on the
intermediate result.
apart from anything this will make the unit test a great deal simpler to
write.
l.
On Friday, May 15, 2020, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
>
>
> On Friday, May 15, 2020, Tobias Platen <libre-soc@platen-software.de>
> wrote:
>
>> I've now done the conversion of countzero.vhdl and most of the testbench.
>
>
> fantastic. next step, to put it into the Logical pipeline and write a
> formal correctness proof (that's the bit that can receive donations!)
>
>
>
> --
> ---
> crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
>
>
--
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-15 9:09 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <20200515110731.0feafda72b6f40ba95d9bf49@platen-software.de>
On Friday, May 15, 2020, Tobias Platen <libre-soc@platen-software.de> wrote:
> I've now done the conversion of countzero.vhdl and most of the testbench.
fantastic. next step, to put it into the Logical pipeline and write a
formal correctness proof (that's the bit that can receive donations!)
--
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Tobias Platen @ 2020-05-15 9:07 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <CAPweEDw1ZjPuGrP8pKk9G+1i2-uRP+4mGNHAZ7Q=o7Och3=AaA@mail.gmail.com>
I've now done the conversion of countzero.vhdl and most of the testbench.
Tobias
On Fri, 15 May 2020 09:28:09 +0100
Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> On Friday, May 15, 2020, Yehowshua <yimmanuel3@gatech.edu> wrote:
>
> > More Create-X stuff. Working on the pinout tonight with Luke’s Python code
> > - will try to have it ready by tomorrow afternoon.
>
>
> good. then we can review. Rudi cannot start until we have a clear
> specification.
>
> l.
>
>
>
> --
> ---
> crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
> _______________________________________________
> libre-riscv-dev mailing list
> libre-riscv-dev@lists.libre-riscv.org
> http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
--
Tobias Platen <libre-soc[at]platen-software[dot]de>
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-15 8:28 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <459D5B7F-438F-47E1-8C81-D4E2C0D8417B@gatech.edu>
On Friday, May 15, 2020, Yehowshua <yimmanuel3@gatech.edu> wrote:
> More Create-X stuff. Working on the pinout tonight with Luke’s Python code
> - will try to have it ready by tomorrow afternoon.
good. then we can review. Rudi cannot start until we have a clear
specification.
l.
--
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Yehowshua @ 2020-05-14 23:16 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDxMq+A-8QNxn0obVU6M7Su=G4MMFfwfRHWuAPLGSpE8kw@mail.gmail.com>
More Create-X stuff. Working on the pinout tonight with Luke’s Python code - will try to have it ready by tomorrow afternoon.
Yehowshua
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-14 22:52 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <D51FC0DE-B374-474E-9FD3-E274B2452E18@getmailspring.com>
On Thu, May 14, 2020 at 11:29 PM Cole Poirier <colepoirier@gmail.com> wrote:
> In that regard, Luke, after I am done with the scripts and the
> modifications to the docs on the wiki, is there some testing
> infrastructure that needs to be worked on, or should I try to start
> learning to make nmigen HDL contributions to the project?
that would be a really good challenge to try anyway. apart from anything
you'd be able to read / recognise the code as it evolves.
> Essentially, what do you reccomend I do next that would be most helpful to the project?
i have nooo idea :) oh wait - i have an idea. could you raise a
bugreport "bperm TODO",
look at the pseudo-code here:
perm <- [0] * 8
for i = 0 to 7
index <- (RS)[8*i:8*i+7]
if index < 64 then
perm[i] <- (RB)[index]
else
perm[i] <- 0
RA <- [0]*56 || perm[0:7]
and see if you can write that in nmigen? this is the simulation
version (translated
from the above pseudo-code), it may be easier to understand:
@inject()
def op_bpermd(self, RS, RB):
perm = concat(0, repeat=8)
for i in range(0, 7 + 1):
index = RS[8 * i:8 * i + 7 + 1]
if lt(index, 64):
perm[i] = RB[index]
else:
perm[i] = 0
RA = concat(concat(0, repeat=56), perm[0:8])
notes:
* repeat=8 you use Repl
* concat you use Cat
* index you will have to actually store that in a temporary Signal (8
bits in length)
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Luke Kenneth Casson Leighton @ 2020-05-14 22:42 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <1AC048A7-FAD5-41EE-B4BF-F622F72EBAF8@getmailspring.com>
On Thu, May 14, 2020 at 10:48 PM Cole Poirier <colepoirier@gmail.com> wrote:
>
> Yesterday I worked on the script that automates the build and
> installation of yosys and the various SYMByosys tools until when trying
> to compile super_prove bitbucket had an internal error failed to load
> for over half an hour. At that point I decided to try again the next
> day. Today the bitbucket is working. I had to create two patches for the
> abc-zz sub-dependency of super_prove, now super_prove compiles
> successfully. Given that this prevents the successful compilation of an
> entire yosys tool, should I make a PR with these small but significant
> patches or should I just be satisfied that it now works for us and move
> on?
report them, put the patch into the git repo with the scripts, put the
link to the patch
on the wiki, and move on.
i only use i think z3solver, yices2 and one other - i didn't bother
with any of the
others.
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Cole Poirier @ 2020-05-14 22:29 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: libre-riscv-dev
In-Reply-To: <1b10f48d-7ca9-a0ea-9f5c-9b0aafd754b2@gmail.com>
On May 14 2020, at 3:00 pm, Michael Nolan <mtnolan2640@gmail.com> wrote:
> I've never been able to/never bothered to install super_prove or aiger
> for use with SymbiYosys. For running the formal proofs Libre-Soc has
> done, I think you only need one of the SMTBMC solvers (my
> recommendation
> is yices2).
>
> --Michael
Thanks for the tip Michael! I'll definitely keep your reccomendation to
use yices2 in mind when setting the default engine in the script (if I
do end up needing to set one, I'm not done yet), and for myself when I
start trying to use nmigen.
In that regard, Luke, after I am done with the scripts and the
modifications to the docs on the wiki, is there some testing
infrastructure that needs to be worked on, or should I try to start
learning to make nmigen HDL contributions to the project? Essentially,
what do you reccomend I do next that would be most helpful to the project?
Here is my code for a working super_prove installation in case you are
interested in trying it out:
```
hg clone https://bitbucket.org/sterin/super_prove_build
cd super_prove_build
patch -u abc-zz/MetaSat/MiniSat2/System.cc <(echo "diff -r bde167bca3cd MetaSat/MiniSat2/System.cc
--- a/MetaSat/MiniSat2/System.cc Thu Sep 14 01:44:08 2017 -0700
+++ b/MetaSat/MiniSat2/System.cc Thu May 14 20:10:24 2020 +0000
@@ -20,6 +20,7 @@
#include <signal.h>
#include <stdio.h>
+#include <stdlib.h>
#include "System.hh"
@@ -27,7 +28,6 @@
#if defined(__linux__)
-#include <stdlib.h>
static inline int memReadStat(int field)
{
")
patch -u abc-zz/Bip/Main_bip.cc <(echo "diff -r bde167bca3cd Bip/Main_bip.cc
--- a/Bip/Main_bip.cc Thu Sep 14 01:44:08 2017 -0700
+++ b/Bip/Main_bip.cc Thu May 14 20:08:52 2020 +0000
@@ -508,8 +508,8 @@
void writeCex(Out& out, NetlistRef N, const Cex& cex, uint orig_num_pis)
{
Vec<Pair<int,GLit> > ffs, pis;
- For_Gatetype(N, gate_Flop, w) ffs.push(tuple(attr_Flop(w).number, w));
- For_Gatetype(N, gate_PI , w) pis.push(tuple(attr_PI (w).number, w));
+ For_Gatetype(N, gate_Flop, w
)ffs.push(ZZ::tuple(attr_Flop(w).number, w));
+ For_Gatetype(N, gate_PI , w) pis.push(ZZ::tuple(attr_PI
(w).number, w));
sort(ffs);
sort(pis);
")
mkdir build && cd build
cmake -DCMAKE_BUILD_TYPE=Release -G Ninja ..
ninja
ninja package
SPBIN=`find . -maxdepth 1 -name "super_prove*-Release.tar.gz"`
tar xvf $SPBIN -C /usr/local/bin/
cat << "EOF" > /usr/local/bin/suprove
#!/bin/bash
tool=super_prove; if [ "$1" != "${1#+}" ]; then tool="${1#+}"; shift; fi
exec /usr/local/bin/super_prove/bin/${tool}.sh "$@"
EOF
chmod +x /usr/local/bin/suprove
suprove
```
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Michael Nolan @ 2020-05-14 22:00 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <1AC048A7-FAD5-41EE-B4BF-F622F72EBAF8@getmailspring.com>
On 5/14/20 5:48 PM, Cole Poirier wrote:
> Yesterday I worked on the script that automates the build and
> installation of yosys and the various SYMByosys tools until when trying
> to compile super_prove bitbucket had an internal error failed to load
> for over half an hour. At that point I decided to try again the next
> day. Today the bitbucket is working. I had to create two patches for the
> abc-zz sub-dependency of super_prove, now super_prove compiles
> successfully. Given that this prevents the successful compilation of an
> entire yosys tool, should I make a PR with these small but significant
> patches or should I just be satisfied that it now works for us and move
> on? The abc-zz dependecy lives in a bitbucket repo
> (https://bitbucket.org/niklaseen/abc-zz/src/default/) that is over five
> years old and the super_prove bitbucket repo's
> (https://bitbucket.org/sterin/super_prove_build/src/default/) most
> recent commit is in 2017. Given this, what would you advise I do with
> regard to a PR/moving on?
>
I've never been able to/never bothered to install super_prove or aiger
for use with SymbiYosys. For running the formal proofs Libre-Soc has
done, I think you only need one of the SMTBMC solvers (my recommendation
is yices2).
--Michael
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] quick write-up about microwatt and Libre-SOC HDL
From: Cole Poirier @ 2020-05-14 21:54 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDz0AUdWW=0o20hXurRCTzkn5evsVKLqJ1y+C1TfuLXWSg@mail.gmail.com>
On May 14 2020, at 2:44 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> just did a write-up saying "thank you" to the authors of microwatt
> http://lists.mailinglist.openpowerfoundation.org/pipermail/openpower-hdl-cores/2020-May/thread.html
> l.
A very lovely letter Luke. I believe that outreach like this will only
serve to enhance our relationship with the microwatt developers as well
as (hopefully) IBM and the OPF.
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 14may2020
From: Cole Poirier @ 2020-05-14 21:48 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDy2_bBVfTFGyYAMvaTDDdxEmWR8jKRZOn7Z469ztvoswQ@mail.gmail.com>
Yesterday I worked on the script that automates the build and
installation of yosys and the various SYMByosys tools until when trying
to compile super_prove bitbucket had an internal error failed to load
for over half an hour. At that point I decided to try again the next
day. Today the bitbucket is working. I had to create two patches for the
abc-zz sub-dependency of super_prove, now super_prove compiles
successfully. Given that this prevents the successful compilation of an
entire yosys tool, should I make a PR with these small but significant
patches or should I just be satisfied that it now works for us and move
on? The abc-zz dependecy lives in a bitbucket repo
(https://bitbucket.org/niklaseen/abc-zz/src/default/) that is over five
years old and the super_prove bitbucket repo's
(https://bitbucket.org/sterin/super_prove_build/src/default/) most
recent commit is in 2017. Given this, what would you advise I do with
regard to a PR/moving on?
I'm hoping to finish the rest of the yosys tools in the script today,
and tomorrow finsish the rest of the HDL_workflow.
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] quick write-up about microwatt and Libre-SOC HDL
From: Luke Kenneth Casson Leighton @ 2020-05-14 21:44 UTC (permalink / raw)
To: Libre-RISCV General Development
just did a write-up saying "thank you" to the authors of microwatt
http://lists.mailinglist.openpowerfoundation.org/pipermail/openpower-hdl-cores/2020-May/thread.html
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] virtual coffee openpower, in 50 minutes
From: Luke Kenneth Casson Leighton @ 2020-05-14 21:08 UTC (permalink / raw)
To: Libre-RISCV General Development
https://openpowerfoundation.org/openpower-virtual-coffee-calls/
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-14 19:48 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=305
--- Comment #71 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
(In reply to Michael Nolan from comment #70)
> (In reply to Luke Kenneth Casson Leighton from comment #68)
> > File "/home/lkcl/src/libresoc/soc/src/soc/decoder/isa/fixedlogical.py",
> > line 223, in op_prtyd
> > s = s / RS[i % 8 + 7]
> >
> > erm... ermermerm... that doesn't look right. divide? instead of ^ (XOR)?
> There's no way they actually mean division there... If so, then every time
> that bit is 0 you get a divide by 0...
yep it's a manual transcription error from when i extracted the text from the
PDF. i've git pushed ^ instead of /, done the submodule update too.
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-14 19:27 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=305
--- Comment #70 from Michael Nolan <mtnolan2640@gmail.com> ---
(In reply to Luke Kenneth Casson Leighton from comment #68)
> File "/home/lkcl/src/libresoc/soc/src/soc/decoder/isa/fixedlogical.py",
> line 223, in op_prtyd
> s = s / RS[i % 8 + 7]
>
> erm... ermermerm... that doesn't look right. divide? instead of ^ (XOR)?
>
> TypeError: unsupported operand type(s) for /: 'int' and 'SelectableInt'
>
> i think, really, we need to do the same trick done with eq, ge etc, turn all
> operations from using python "op1 + op2" into "add(op1, op2)" and sort out
> the operands - convert to SelectableInt - in there.
There's no way they actually mean division there... If so, then every time that
bit is 0 you get a divide by 0...
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-14 19:21 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=305
--- Comment #69 from Michael Nolan <mtnolan2640@gmail.com> ---
(In reply to Luke Kenneth Casson Leighton from comment #67)
> (In reply to Luke Kenneth Casson Leighton from comment #66)
>
> > i added popcount (because). it looks like it works except test_cmpb is
> > not working
>
> after updating submodules (will commit in a sec)
>
> File "/home/lkcl/src/libresoc/soc/src/soc/decoder/isa/fixedlogical.py",
> line 193, in op_cmpb
> if eq(RS[8 * n:8 * n + 7 + 1], RB[8 * n:8 * n + 7 + 1]):
> NameError: name 'RS' is not defined
Oops, needed a patch (or figuring out why the compiler didn't include RS)
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-14 19:10 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=305
--- Comment #68 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
File "/home/lkcl/src/libresoc/soc/src/soc/decoder/isa/fixedlogical.py", line
223, in op_prtyd
s = s / RS[i % 8 + 7]
erm... ermermerm... that doesn't look right. divide? instead of ^ (XOR)?
TypeError: unsupported operand type(s) for /: 'int' and 'SelectableInt'
i think, really, we need to do the same trick done with eq, ge etc, turn all
operations from using python "op1 + op2" into "add(op1, op2)" and sort out
the operands - convert to SelectableInt - in there.
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
page: next prev latest
Libre RISC-V Mailing list Archives (accessible via public-inbox)
Archives are clonable: git clone --mirror https://inbox.libre-soc.org/libre-riscv-dev
Example config snippet for mirrors
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git