Libre RISC-V Mailing list Archives (accessible via public-inbox)
 help / color / Atom feed
From: Jacob Lifshay <programmerjake@gmail.com>
To: Libre-RISCV General Development <libre-riscv-dev@lists.libre-riscv.org>
Subject: [libre-riscv-dev] using a stage chain in a stage
Date: Wed, 3 Jun 2020 17:52:57 -0700
Message-ID: <CAC2bXD6Znt5PPj6n22eRV-fnGt6kdRotWFKeX2uxDcm3T57rLw@mail.gmail.com> (raw)

I'm trying to build the div pipe, however, the ispec and ospec need to
be different than the currently existing code since that is FP
specific, there needs to be additional io signals that are not
included in all the FP*Data classes. Additionally, I don't want to
just overwrite the existing FPDiv pipe code since I'm not planning on
adding FP div support right away, and the code needs to be refactored
somewhat since the FPdiv pipe code is currently generic over being
16/32/64-bit at compile-time and the new code will need to be able to
dynamically switch between them at runtime, once FP is added again.

Luke, or whoever's available, can you give me an example of a
combinatorial stage chain that is used inside a single stage without
being wired as the inputs and outputs, along with getting all the
pipekls stuff connected properly?

Somewhat unrelated, I moved all the unused code out of the fpdiv
folder and into the unused folder

Jacob

_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-04  0:52 Jacob Lifshay [this message]
2020-06-04  1:20 ` Luke Kenneth Casson Leighton
2020-06-04  1:30   ` Jacob Lifshay
2020-06-04  1:37     ` Luke Kenneth Casson Leighton
2020-06-04  1:32   ` Luke Kenneth Casson Leighton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAC2bXD6Znt5PPj6n22eRV-fnGt6kdRotWFKeX2uxDcm3T57rLw@mail.gmail.com \
    --to=programmerjake@gmail.com \
    --cc=libre-riscv-dev@lists.libre-riscv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Libre RISC-V Mailing list Archives (accessible via public-inbox)

Archives are clonable: git clone --mirror https://inbox.libre-soc.org/libre-riscv-dev

Example config snippet for mirrors


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git