Libre RISC-V Mailing list Archives (accessible via public-inbox)
 help / color / Atom feed
* [libre-riscv-dev] marketnext online call, earlier today
From: Luke Kenneth Casson Leighton @ 2020-05-15 13:44 UTC (permalink / raw)
  To: Libre-RISCV General Development

went very well.  it was over 2 hours (100 attendees), i got an
opportunity to speak for 5 minutes about our project, and for Shine,
the Director of the Marketnext Foundation, to mention the upcoming
Hackathon online session which will be May 30th.

there are at least 15 different groups who have expressed an interest
in helping with the project in the various different NLNet-funded
categories: this is a LOT of people to take on board at once, so one
of the things that will be important to do is to create separate
mailing lists for the different NLNet milestones: coriolis2 layout,
formal proofs, and so on, and have the bugtracker report to those
*different* locations rather than a single list.

we really, really need the LD/ST Comp Unit working by then, otherwise
i will be unable to focus on it.  to get it done i need help and
review.

also we need a branch / trap / anything-that-changes-the-PC Function
Unit.  from Samuel's early advice, he pointed out that any new
processor should get three instructions working:

* load
* add
* branch

from there, everything else falls into place.

l.

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68

_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 311] countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 13:51 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-311-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=311

--- Comment #4 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
*face-palm*

i just realised that countzero is basically a PriorityEncoder
https://github.com/m-labs/nmigen/blob/master/nmigen/lib/coding.py

and that 90% of countzero.py can disappear as a result (sigh)

however it is not *just* a PriorityEncoder: countzero not only
changes the end from which it counts (MSB instead of LSB), it
changes 32-bit and 64-bit modes as well.

i am inclined however to suggest leaving that for now: what this
does mean however is that the formal proof is one that revolves
around PriorityEncoder more than anything else.

i will raise a suitable bugreport for that, now.

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 14:00 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

--- Comment #72 from Michael Nolan <mtnolan2640@gmail.com> ---
(In reply to Luke Kenneth Casson Leighton from comment #68)
>   File "/home/lkcl/src/libresoc/soc/src/soc/decoder/isa/fixedlogical.py",
> line 223, in op_prtyd
>     s = s / RS[i % 8 + 7]
> 
> erm... ermermerm... that doesn't look right.  divide?  instead of ^ (XOR)?
> 
> TypeError: unsupported operand type(s) for /: 'int' and 'SelectableInt'
> 

The modulus doesn't fit with the description of what the instruction does or
with the behavior on qemu. I think they meant for that to be a multiplication.

Should we report this to IBM? It looks like they corrected the xor part in the
3.1 spec, but they're still using modulus for the bit indices.

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 312] New: Formal Correctness Proof for CountZero needed (basically PriorityEncoder)
From: bugzilla-daemon @ 2020-05-15 14:01 UTC (permalink / raw)
  To: libre-riscv-dev

https://bugs.libre-soc.org/show_bug.cgi?id=312

            Bug ID: 312
           Summary: Formal Correctness Proof for CountZero needed
                    (basically PriorityEncoder)
           Product: Libre-SOC's first SoC
           Version: unspecified
          Hardware: PC
                OS: Mac OS
            Status: CONFIRMED
          Severity: enhancement
          Priority: ---
         Component: Formal Verification
          Assignee: lkcl@lkcl.net
          Reporter: lkcl@lkcl.net
                CC: libre-riscv-dev@lists.libre-riscv.org
   NLnet milestone: ---

a formal correctness proof is needed for POWER countzero.py
the majority of that is actually a proof for PriorityEncoder,
with the rest taking care of niggles surrounding starting the
count from the MSB rather than the LSB, and 64/32 bit mode

the basis of the proof is a for-loop:

for i in range(64) - or 32
    with m.If(result == i):
        Assert(input[i] == 1)  -- assert that the bit in the input is a 1
        Assert(input & (1<<(i-1)-1) == 0   -- all bits below must be zero

this is basically the count done in a different way, however the important bit
about the proof is that it operates "inverted" from the actual computation.  it
starts from the *result* condition - result == i - and based on that result,
analyses (performs Assertions) on the *input*.

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 312] Formal Correctness Proof for CountZero needed (basically PriorityEncoder)
From: bugzilla-daemon @ 2020-05-15 14:01 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-312-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=312

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
    NLnet milestone|---                         |NLNet.2019.10.Formal
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=311

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 311] countzero function for Logic Pipeline
From: bugzilla-daemon @ 2020-05-15 14:01 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-311-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=311

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=312

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 14:13 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

--- Comment #73 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
this is from V3.0B - page 98:

s <- 0
t <- 0
do i = 0 to 3
   s <- s / (RS)[i%8+7]
do i = 4 to 7
   t <- t / (RS)[i%8+7]

so yes that's wrong (divide).


microwatt ppc_fx_insns.vhdl has this:

    function ppc_prtyd (rs: std_ulogic_vector(63 downto 0)) return
std_ulogic_vector is
        variable tmp : std_ulogic;
        variable ret : std_ulogic_vector(63 downto 0);
    begin
        ret := (others => '0');

        tmp := '0';
        for i in 0 to 7 loop
            tmp := tmp xor rs(i*8);
        end loop;

        ret(0) := tmp;
        return ret;
    end;

and that's definitely "times 8" there.

note that they didn't end up using that function, the loop was unrolled as
follows:

        par0 <= rs(0) xor rs(8) xor rs(16) xor rs(24);
        par1 <= rs(32) xor rs(40) xor rs(48) xor rs(56);

so yes, please do correct the pseudo-code and report it as a bug in
the spec to IBM (good idea to cross-reference this discussion)

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 312] Formal Correctness Proof for CountZero needed (basically PriorityEncoder)
From: bugzilla-daemon @ 2020-05-15 14:15 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-312-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=312

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
    parent task for|                            |198
  budget allocation|                            |

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 312] Formal Correctness Proof for CountZero needed (basically PriorityEncoder)
From: bugzilla-daemon @ 2020-05-15 14:16 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-312-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=312

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
 total budget (EUR)|0                           |150
  for completion of|                            |
       task and all|                            |
           subtasks|                            |

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 198] Formal correctness proofs are needed for low-level libraries in LibreSOC
From: bugzilla-daemon @ 2020-05-15 14:16 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-198-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=198

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
   budget (EUR) for|8400                        |8250
 completion of task|                            |
   (excludes budget|                            |
       allocated to|                            |
          subtasks)|                            |

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 14:19 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

--- Comment #74 from Michael Nolan <mtnolan2640@gmail.com> ---
(In reply to Luke Kenneth Casson Leighton from comment #73)
> 
> so yes, please do correct the pseudo-code and report it as a bug in
> the spec to IBM (good idea to cross-reference this discussion)

Cool. I've not interacted with IBM before, how do I go about reporting a bug?

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 14:23 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

--- Comment #75 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
(In reply to Michael Nolan from comment #74)
> (In reply to Luke Kenneth Casson Leighton from comment #73)
> > 
> > so yes, please do correct the pseudo-code and report it as a bug in
> > the spec to IBM (good idea to cross-reference this discussion)
> 
> Cool. I've not interacted with IBM before, how do I go about reporting a bug?

oh, sorry: just send a message to openhdl-cores... you may have to subscribe
http://lists.mailinglist.openpowerfoundation.org/pipermail/openpower-hdl-cores/
http://lists.mailinglist.openpowerfoundation.org/mailman/listinfo/openpower-hdl-cores

i can do it if you like, so you can focus on coding, etc. up to you, i
don't mind.

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] Power ISA v3.1 bug - parityw
From: Michael Nolan @ 2020-05-15 15:07 UTC (permalink / raw)
  To: openpower-hdl-cores, Libre-RISCV General Development

Hello! I'm with the Libre-SOC team, and was working on testing our 
implementation of the parityw and parityd instructions when I came 
across the following bug in the specification. The specification 
describes prtyd as follows:

s <- 0

do i = 0 to 7

     s <- s (XOR) RS[i%8 + 7]

RA <- 63'b0 || s

The least significant bit in each byte of the contents of register RS is 
examined. If there is an odd number of one bits the value 1 is placed 
into register RA; otherwise the value 0 is placed into register RA.



The description of "least significant bit in each byte" leads me to 
believe that RS[i%8 + 7] should really be RS[i*8+7]. This is also how it 
is implemented in microwatt

https://github.com/antonblanchard/microwatt/blob/master/ppc_fx_insns.vhdl 
line 297:

     function ppc_prtyd (rs: std_ulogic_vector(63 downto 0)) return std_ulogic_vector is
         variable tmp : std_ulogic;
         variable ret : std_ulogic_vector(63 downto 0);
     begin
         ret := (others => '0');

         tmp := '0';
         for i in 0 to 7 loop
             tmp := tmp xor rs(i*8);
         end loop;

         ret(0) := tmp;
         return ret;
     end;

Could you confirm whether RS[i*8+7] is the correct behavior?

Thanks,
Michael Nolan

P.S. Our discussion on the Libre-SOC bugzilla: https://bugs.libre-soc.org/show_bug.cgi?id=305#c73


_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 15:07 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

--- Comment #76 from Michael Nolan <mtnolan2640@gmail.com> ---
(In reply to Luke Kenneth Casson Leighton from comment #75)

> oh, sorry: just send a message to openhdl-cores... you may have to subscribe
> http://lists.mailinglist.openpowerfoundation.org/pipermail/openpower-hdl-
> cores/
> http://lists.mailinglist.openpowerfoundation.org/mailman/listinfo/openpower-
> hdl-cores
> 
> i can do it if you like, so you can focus on coding, etc. up to you, i
> don't mind.

Reported and the pseudocode has been fixed

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* Re: [libre-riscv-dev] Power ISA v3.1 bug - parityw
From: Luke Kenneth Casson Leighton @ 2020-05-15 15:09 UTC (permalink / raw)
  To: Libre-RISCV General Development; +Cc: openpower-hdl-cores
In-Reply-To: <48876f64-f3fa-c616-6710-ba773c89173c@gmail.com>

On Fri, May 15, 2020 at 4:07 PM Michael Nolan <mtnolan2640@gmail.com> wrote:

> s <- 0
>
> do i = 0 to 7
>
>      s <- s (XOR) RS[i%8 + 7]

we note that in V3.0B this was s <- s / RS[I%8 + 7] - divide and
modulo rather than XOR and multiply.

l.

_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 15:29 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

--- Comment #77 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
(In reply to Michael Nolan from comment #76)

> Reported and the pseudocode has been fixed

great.  ran test_prty and it worked great.  hmm at some point we could do with
an option to run tests against qemu ppc[32/64][le/be]

next on the planning / TODO list, michael:

* OP_B* plus OP_TRAP, OP_RFID (anything that sets the PC by setting NIA)
* condition register stuff: OP_MFCR, OP_CROP, OP_MTCRF
* SPR stuff: OP_MTSPR and OP_MFSPR

probably good idea to raise separate bugreports for these.  i have no idea
where OP_ISEL or OP_MTMSRD would fit :)

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 313] New: Create Branch Pipeline for POWER9
From: bugzilla-daemon @ 2020-05-15 15:30 UTC (permalink / raw)
  To: libre-riscv-dev

https://bugs.libre-soc.org/show_bug.cgi?id=313

            Bug ID: 313
           Summary: Create Branch Pipeline for POWER9
           Product: Libre-SOC's first SoC
           Version: unspecified
          Hardware: PC
                OS: Mac OS
            Status: CONFIRMED
          Severity: enhancement
          Priority: ---
         Component: Source Code
          Assignee: lkcl@lkcl.net
          Reporter: lkcl@lkcl.net
                CC: libre-riscv-dev@lists.libre-riscv.org
   NLnet milestone: ---

see https://github.com/antonblanchard/microwatt/blob/master/execute1.vhdl
we need:

* OP_B*
* OP_TRAP
* OP_RFID

anything that sets the PC by setting NIA

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 313] Create Branch Pipeline for POWER9
From: bugzilla-daemon @ 2020-05-15 15:30 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-313-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=313

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=305

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 15:30 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=313

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 314] New: Create Condition Register pipeline
From: bugzilla-daemon @ 2020-05-15 15:33 UTC (permalink / raw)
  To: libre-riscv-dev

https://bugs.libre-soc.org/show_bug.cgi?id=314

            Bug ID: 314
           Summary: Create Condition Register pipeline
           Product: Libre-SOC's first SoC
           Version: unspecified
          Hardware: PC
                OS: Mac OS
            Status: CONFIRMED
          Severity: enhancement
          Priority: ---
         Component: Source Code
          Assignee: lkcl@lkcl.net
          Reporter: lkcl@lkcl.net
                CC: libre-riscv-dev@lists.libre-riscv.org
   NLnet milestone: ---

we need a Condition Register pipeline
https://github.com/antonblanchard/microwatt/blob/master/execute1.vhdl
https://libre-soc.org/openpower/isa/condition/

* OP_MFCR
* OP_CROP (which includes MCRF)
* OP_MTCRF

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 314] Create Condition Register pipeline
From: bugzilla-daemon @ 2020-05-15 15:33 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-314-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=314

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=313

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 313] Create Branch Pipeline for POWER9
From: bugzilla-daemon @ 2020-05-15 15:33 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-313-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=313

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=314

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 314] Create Condition Register pipeline
From: bugzilla-daemon @ 2020-05-15 15:33 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-314-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=314

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=305

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 305] Create Pipelined ALU similar to alu_hier.py
From: bugzilla-daemon @ 2020-05-15 15:33 UTC (permalink / raw)
  To: libre-riscv-dev
In-Reply-To: <bug-305-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=305

Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           See Also|                            |https://bugs.libre-soc.org/
                   |                            |show_bug.cgi?id=314

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

* [libre-riscv-dev] [Bug 315] New: SPR Pipeline needed
From: bugzilla-daemon @ 2020-05-15 15:40 UTC (permalink / raw)
  To: libre-riscv-dev

https://bugs.libre-soc.org/show_bug.cgi?id=315

            Bug ID: 315
           Summary: SPR Pipeline needed
           Product: Libre-SOC's first SoC
           Version: unspecified
          Hardware: PC
                OS: Mac OS
            Status: CONFIRMED
          Severity: enhancement
          Priority: ---
         Component: Source Code
          Assignee: lkcl@lkcl.net
          Reporter: lkcl@lkcl.net
                CC: libre-riscv-dev@lists.libre-riscv.org
   NLnet milestone: ---

SPR set/get pipeline is needed
see https://github.com/antonblanchard/microwatt/blob/master/execute1.vhdl
https://libre-soc.org/openpower/isa/sprset/

* OP_MTSPR
* OP_MFSPR

note that setb is not implemented by microwatt

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

^ permalink raw reply

page:   latest

Libre RISC-V Mailing list Archives (accessible via public-inbox)

Archives are clonable: git clone --mirror https://inbox.libre-soc.org/libre-riscv-dev

Example config snippet for mirrors


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git