[libre-riscv-dev] [Bug 288] intro post for powerpc-notebook.org and https://www.powerprogress.org/en/ - bugzilla-daemon

From: bugzilla-daemon@libre-soc.org
To: libre-riscv-dev@lists.libre-riscv.org
Subject: [libre-riscv-dev] [Bug 288] intro post for powerpc-notebook.org and https://www.powerprogress.org/en/
Date: Wed, 22 Apr 2020 19:42:49 +0000
Message-ID: <bug-288-13-HXuuKglmdG@https.bugs.libre-soc.org/> (raw)
In-Reply-To: <bug-288-13@https.bugs.libre-soc.org/>

https://bugs.libre-soc.org/show_bug.cgi?id=288

--- Comment #8 from Luke Kenneth Casson Leighton <lkcl@lkcl.net> ---
(In reply to Luke Kenneth Casson Leighton from comment #6)

> full bootloader and on-board boot firmware source.

on-board boot ROM, sorry.  shorter.  if everyone's good with it
i'll write to roberto.

next we need to work out what (and where) to put something
about these:
https://www.powerprogress.org/en/
https://www.powerpc-notebook.org/en/

this is a good clean design, i like it
https://i0.wp.com/www.powerpc-notebook.org/wp-content/uploads/2020/04/ppc_bloc_diagram_05_04_2020_s.png?ssl=1

it's actually pretty similar to what would go on our SoCs,
particularly if we could get hold of a PCIe PHY.

however... 2x DDR3, that's 250-300 pins, right there.
(actually just found the datasheet, it's 1x 32/64 so will
be around... 200-250).  3 PCIE x4
plus a PCIe x2, is... a looot more.  300+ i think.

datasheet says it's 780 pins FP-PBGA, 23x23mm

-- 
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev