* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Cole Poirier @ 2020-05-23 21:38 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDw1nSkxL084QXyzNHGf+9hmi6ZTkgaV1F4xAkW4EJi2ug@mail.gmail.com>
On May 23 2020, at 1:59 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> soc.fu they are now common base classes. the code is exactly the
> same, it
> is just split.
I tried fixing this the naive way, by just substituting CommonInput
stageStage for LogicalInputStage but this results in the following error:
```
File "test_pipe_caller.py", line 193, in run_all
m.submodules.alu = alu = LogicalBasePipe(pspec)
File "/home/colepoirier/src/soc/src/soc/fu/logical/pipeline.py", line
18, in __init__
self.pipe1 = LogicalStages(pspec)
File "/home/colepoirier/src/nmutil/src/nmutil/dynamicpipe.py", line 37,
in __call__
return super().__call__(*args, **kw)
File "/home/colepoirier/src/nmutil/src/nmutil/pipemodbase.py", line 34,
in __init__
self.chain = self.get_chain()
File "/home/colepoirier/src/soc/src/soc/fu/logical/pipeline.py", line 9,
in get_chain
inp = CommonInputStage(self.pspec)
TypeError: __init__() missing 1 required positional argument: 'modname'
```
Do I have to add something from fu/logical/logical_input_record.py, or
add something else in order to use CommonInputStage properly?
> one weirdness, if you put a print statement on a and b, a is a signal, but
> b ends up as an actual integer.
Are you referring to a and b of the CommonStage's or of another piece of code?
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Cesar Strauss @ 2020-05-23 22:08 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <CAPweEDzcvyqr-25ctDUB38zkDtjXMWX9xErAh8U77QrdyuyXzA@mail.gmail.com>
On 05/23/2020 17:57, Luke Kenneth Casson Leighton escreveu:
> it is 3am in brazil so Cesar will not be up, write on that bugreport when
> you start and finish ok?
Something must have gone wrong somewhere...
It was only around 18:00 here, when you wrote that, not 03:00.
I'm on UTC-03:00.
Try:
$ TZ='America/Sao_Paulo' date
or, do "date -u" and subtract 3 hours.
Cheers,
Cesar
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:14 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <16cb4531-b727-dd88-b434-1c72cdb593d9@gmail.com>
On Sat, May 23, 2020 at 11:08 PM Cesar Strauss <cestrauss@gmail.com> wrote:
>
> On 05/23/2020 17:57, Luke Kenneth Casson Leighton escreveu:
> > it is 3am in brazil so Cesar will not be up, write on that bugreport when
> > you start and finish ok?
>
> Something must have gone wrong somewhere...
>
> It was only around 18:00 here, when you wrote that, not 03:00.
>
> I'm on UTC-03:00.
ah! i thought UTC +3, sorry!
ok Cole, let Cesar do the zero_imm unit test.
let me think what else to do.
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:15 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <A3B236A9-A469-4493-AE7E-0195E1F7F2CD@getmailspring.com>
On Sat, May 23, 2020 at 10:39 PM Cole Poirier <colepoirier@gmail.com> wrote:
>
> On May 23 2020, at 1:59 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> > soc.fu they are now common base classes. the code is exactly the
> > same, it
> > is just split.
>
> I tried fixing this the naive way, by just substituting CommonInput
> stageStage for LogicalInputStage but this results in the following error:
>
> ```
> File "test_pipe_caller.py", line 193, in run_all
ok because you are running from "cd x.y.z" and then doing "python
./test_pipe_caller.py" i cannot tell which one of EIGHT
test_pipe_caller.py you are running.
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:16 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDyi+M8bMxHfOTvpCN+5Xto3hSsRsUucHJqoHLG_gHtTCQ@mail.gmail.com>
$ python3 fu/logical/test/test_pipe_caller.py
succeeds.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:16 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDwrSREgayJQ0rHzAv45=uuQOMV_zXHWf5-JXvA61K8QUA@mail.gmail.com>
$
python3 fu/alu/test/test_pipe_caller.py
succeeds.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:17 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDx7X+V3svfLyGommFE9kZUw+8oLsoG+EhWTD5qqEA_c8A@mail.gmail.com>
python3 fu/cr/test/test_pipe_caller.py
succeeds.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:18 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <CAPweEDzhTY4EyU+T1nSiEM96DeQQ7e9WvAOiJtaepO7LtDgSqg@mail.gmail.com>
python3 fu/shift_rot/test/test_pipe_caller.py
succeeds
(am i giving the clear message that the information "python
test_pipe_caller.py" is not enough, yet? :) )
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Cole Poirier @ 2020-05-23 22:20 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDzhTY4EyU+T1nSiEM96DeQQ7e9WvAOiJtaepO7LtDgSqg@mail.gmail.com>
On May 23 2020, at 3:17 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> python3 fu/cr/test/test_pipe_caller.py
fu/logical/test/test_pipe_caller.py:
``
Traceback (most recent call last):
File "test/test_pipe_caller.py", line 14, in <module>
from soc.fu.logical.pipeline import LogicalBasePipe
File "/home/colepoirier/src/soc/src/soc/fu/logical/pipeline.py", line
3, in <module>
from soc.fu.logical.input_stage import LogicalInputStage
ModuleNotFoundError: No module named 'soc.fu.logical.input_stage'
```
Sorry I thought this was clear from: "Do I have to add something from
fu/logical/logical_input_record.py, or
add something else in order to use CommonInputStage properly?" I'll be
more explicit in the future.
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Cole Poirier @ 2020-05-23 22:23 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDyi+M8bMxHfOTvpCN+5Xto3hSsRsUucHJqoHLG_gHtTCQ@mail.gmail.com>
On May 23 2020, at 3:14 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> On Sat, May 23, 2020 at 11:08 PM Cesar Strauss <cestrauss@gmail.com> wrote:
>>
>> On 05/23/2020 17:57, Luke Kenneth Casson Leighton escreveu:
>> > it is 3am in brazil so Cesar will not be up, write on that
>> bugreport when
>> > you start and finish ok?
>>
>> Something must have gone wrong somewhere...
>>
>> It was only around 18:00 here, when you wrote that, not 03:00.
>>
>> I'm on UTC-03:00.
>
> ah! i thought UTC +3, sorry!
>
> ok Cole, let Cesar do the zero_imm unit test.
>
> let me think what else to do.
>
> l.
Will do! I'll await your directions.
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:23 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <A3B236A9-A469-4493-AE7E-0195E1F7F2CD@getmailspring.com>
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Sat, May 23, 2020 at 10:39 PM Cole Poirier <colepoirier@gmail.com> wrote:
>
> On May 23 2020, at 1:59 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> > soc.fu they are now common base classes. the code is exactly the
> > same, it
> > is just split.
>
> I tried fixing this the naive way, by just substituting CommonInput
> stageStage for LogicalInputStage
why?
look at the class:
class LogicalInputStage(CommonInputStage):
def __init__(self, pspec):
super().__init__(pspec, "input") <---- must be initialised
with an argument, "input"
def ispec(self):
return LogicalInputData(self.pspec) <--- CommonInputStage
does not have this
def ospec(self):
return LogicalInputData(self.pspec) <---- CommonInputStage
does not have this
def elaborate(self, platform):
m = super().elaborate(platform) # covers A-invert, carry, excludes SO
comb = m.d.comb
ctx = self.i.ctx
# operand b
comb += self.o.b.eq(self.i.b) <---- CommonInputStage does
not do this
return m
so what you are trying to do is guaranteed to fail, on four separate counts.
* no initialisation of CommonInputStage 1st parameter
* no ispec
* no ospec
* parameter B will not be copied over
so, don't do that.
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:27 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <1A8469A7-6896-4AA1-80E9-CC9CA0FCF8C9@getmailspring.com>
On Sat, May 23, 2020 at 11:20 PM Cole Poirier <colepoirier@gmail.com> wrote:
>
> On May 23 2020, at 3:17 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
>
> > python3 fu/cr/test/test_pipe_caller.py
>
> fu/logical/test/test_pipe_caller.py:
>
> ``
> Traceback (most recent call last):
> File "test/test_pipe_caller.py", line 14, in <module>
> from soc.fu.logical.pipeline import LogicalBasePipe
> File "/home/colepoirier/src/soc/src/soc/fu/logical/pipeline.py", line
> 3, in <module>
> from soc.fu.logical.input_stage import LogicalInputStage
> ModuleNotFoundError: No module named 'soc.fu.logical.input_stage'
> ```
i missed that - that was what i needed. so that was my fault, i've
added (and pushed) them now.
it should have been the first reaction. not to try to "fix" the
problem and then report an error in the method that you were trying to
fix the issue (that you didn't clearly state existed)
the very first thing should have been "report the original error".
> Sorry I thought this was clear from: "Do I have to add something from
> fu/logical/logical_input_record.py, or
> add something else in order to use CommonInputStage properly?"
not at all.
> I'll be more explicit in the future.
always a good idea, and something that everyone forgets (including me).
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Cole Poirier @ 2020-05-23 22:32 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDw+zpVOQSfcvanYTqxZh=qrsX0D9Nrh0bi1wBMtS9YkhA@mail.gmail.com>
On May 23 2020, at 3:27 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> On Sat, May 23, 2020 at 11:20 PM Cole Poirier <colepoirier@gmail.com> wrote:
>>
>> On May 23 2020, at 3:17 pm, Luke Kenneth Casson Leighton
>> <lkcl@lkcl.net> wrote:
>>
>> > python3 fu/cr/test/test_pipe_caller.py
>>
>> fu/logical/test/test_pipe_caller.py:
>>
>> ``
>> Traceback (most recent call last):
>> File "test/test_pipe_caller.py", line 14, in <module>
>> from soc.fu.logical.pipeline import LogicalBasePipe
>> File "/home/colepoirier/src/soc/src/soc/fu/logical/pipeline.py", line
>> 3, in <module>
>> from soc.fu.logical.input_stage import LogicalInputStage
>> ModuleNotFoundError: No module named 'soc.fu.logical.input_stage'
>> ```
>
> i missed that - that was what i needed. so that was my fault, i've
> added (and pushed) them now.
>
> it should have been the first reaction. not to try to "fix" the
> problem and then report an error in the method that you were trying to
> fix the issue (that you didn't clearly state existed)
>
> the very first thing should have been "report the original error".
Learning. Will try to do this, but I expect to fail at least one more
time :)
>> Sorry I thought this was clear from: "Do I have to add something from
>> fu/logical/logical_input_record.py, or
>> add something else in order to use CommonInputStage properly?"
>
> not at all.
>
>> I'll be more explicit in the future.
>
> always a good idea, and something that everyone forgets (including me).
>
> l.
Indeed. I'm trying to adapt to these new better habits of explicitness,
and the above 'explicitly state errors exist before doing something
fruitless/useless', but my old bad habits are clearly putting up a
fight. I will continue to try my best :)
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 316] bperm TODO
From: bugzilla-daemon @ 2020-05-23 22:35 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-316-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=316
--- Comment #94 from Cole Poirier <colepoirier@gmail.com> ---
Michael, the unit tests for fu/logical/test/test_pipe_caller.py has been fixed
by luke, and now produces a failed test for my module bpermd. Thanks for your
help!
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:36 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <33C444DE-A89B-4D29-8F47-7EA2CE3A190D@getmailspring.com>
On Sat, May 23, 2020 at 11:23 PM Cole Poirier <colepoirier@gmail.com> wrote:
> Will do! I'll await your directions.
ok so i sorted the missing files that i'd forgotten to commit. that
unblocks (at least) 2 people from proceeding. whew. ok now what.
oh i know. i got one.
can you look at soc/fu/compunits.py and add some extra imports which
create the following classes:
* BranchFunctionUnit
* ShiftRotFunctionUnit
etc. etc.
it should be blindingly obvious what to do.
should keep you occupied for all of ooo 5 minutes whilst i think.
l.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 22:39 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <248833F3-C9C8-4BCE-8D87-7BE7F9512764@getmailspring.com>
On Sat, May 23, 2020 at 11:32 PM Cole Poirier <colepoirier@gmail.com> wrote:
> > the very first thing should have been "report the original error".
>
> Learning. Will try to do this, but I expect to fail at least one more
> time :)
:)
the immediate response to report the missing module can be easily
deduced from the workflow.
you *know* that people - everyone - should only commit code that
"works" (passes unit tests). therefore, if someone commits code that
breaks, and it says "import module not found", you *know* that they
must have forgotten to commit a module.
.. yes?
easy, eh?
> Indeed. I'm trying to adapt to these new better habits of explicitness,
> and the above 'explicitly state errors exist before doing something
> fruitless/useless', but my old bad habits are clearly putting up a
> fight. I will continue to try my best :)
:)
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 341] New: unit tests needed for soc.fu.compunits (shared with soc.fu.*/test_pipe_caller.py)
From: bugzilla-daemon @ 2020-05-23 22:50 UTC (permalink / raw)
To: libre-riscv-dev
https://bugs.libre-soc.org/show_bug.cgi?id=341
Bug ID: 341
Summary: unit tests needed for soc.fu.compunits (shared with
soc.fu.*/test_pipe_caller.py)
Product: Libre-SOC's first SoC
Version: unspecified
Hardware: PC
OS: Linux
Status: CONFIRMED
Severity: enhancement
Priority: ---
Component: Source Code
Assignee: lkcl@lkcl.net
Reporter: lkcl@lkcl.net
CC: libre-riscv-dev@lists.libre-riscv.org
NLnet milestone: ---
we need some test infrastructure that does exactly the same as
every single one of the test_pipe_caller.py unit tests, except
using ALUFunctionUnit, CRFunctionUnit etc. instead of
ALUBasePipe+ALUPipeSpec, CRBasePipe+CRPipeSpec etc.
the only pieces of code that need to change to achieve this is
how the inputs are set up, and the outputs obtained.
this basically means generalising each test_pipe_caller.py
TestRunner.run_all().process() function, so that instead
of explicitly targetting the alu instance:
vld = yield alu.n.valid_o
while not vld:
yield
vld = yield alu.n.valid_o
yield
alu_out = yield alu.n.data_o.o
instead it allows a parameterised selection of the MultiCompUnit API /
data-synchronisation method (see experiment/compalu_multi.py tests):
yield dut.issue_i.eq(1)
yield
yield dut.issue_i.eq(0)
yield
yield dut.rd.go.eq(0b11)
while True:
yield
rd_rel_o = yield dut.rd.rel
print ("rd_rel", rd_rel_o)
if rd_rel_o:
break
(actually, this ties in with Cesar's task, somewhat).
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 341] unit tests needed for soc.fu.compunits (shared with soc.fu.*/test_pipe_caller.py)
From: bugzilla-daemon @ 2020-05-23 22:52 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-341-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=341
Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
Depends on| |305, 318
See Also| |https://bugs.libre-soc.org/
| |show_bug.cgi?id=336
Referenced Bugs:
https://bugs.libre-soc.org/show_bug.cgi?id=305
[Bug 305] Create Pipelined ALU similar to alu_hier.py
https://bugs.libre-soc.org/show_bug.cgi?id=318
[Bug 318] fix LDSTCompUnit
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 336] ALU CompUnit needs to recognise that RA (src1) can be zero
From: bugzilla-daemon @ 2020-05-23 22:52 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-336-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=336
Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
See Also| |https://bugs.libre-soc.org/
| |show_bug.cgi?id=341
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 342] New: formal proof of soc.fu.compunits.FunctionUnitBaseSingle needed
From: bugzilla-daemon @ 2020-05-23 22:57 UTC (permalink / raw)
To: libre-riscv-dev
https://bugs.libre-soc.org/show_bug.cgi?id=342
Bug ID: 342
Summary: formal proof of
soc.fu.compunits.FunctionUnitBaseSingle needed
Product: Libre-SOC's first SoC
Version: unspecified
Hardware: PC
OS: Linux
Status: CONFIRMED
Severity: enhancement
Priority: ---
Component: Source Code
Assignee: lkcl@lkcl.net
Reporter: lkcl@lkcl.net
CC: libre-riscv-dev@lists.libre-riscv.org
NLnet milestone: ---
we need a formal proof of both MultiCompUnit and FunctionUnitBaseSingle.
a formal proof of the ALU that is used is *not* necessary, so a very
basic (stub) ALU can be created and used.
however, the proof needs to be written to test the following:
* 1 to 3 src input operands
* 1 to 2 dest operands
* with *and without* zero_a capabiltiy
* with *and without* immediate capability
so that's actually quite a lot of combinations: 3x2x2x2
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 342] formal proof of soc.fu.compunits.FunctionUnitBaseSingle needed
From: bugzilla-daemon @ 2020-05-23 22:57 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-342-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=342
Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
Component|Source Code |Formal Verification
NLnet milestone|--- |NLNet.2019.10.Formal
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 342] formal proof of soc.fu.compunits.FunctionUnitBaseSingle needed
From: bugzilla-daemon @ 2020-05-23 22:58 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-342-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=342
Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
See Also| |https://bugs.libre-soc.org/
| |show_bug.cgi?id=341
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* [libre-riscv-dev] [Bug 341] unit tests needed for soc.fu.compunits (shared with soc.fu.*/test_pipe_caller.py)
From: bugzilla-daemon @ 2020-05-23 22:58 UTC (permalink / raw)
To: libre-riscv-dev
In-Reply-To: <bug-341-13@https.bugs.libre-soc.org/>
https://bugs.libre-soc.org/show_bug.cgi?id=341
Luke Kenneth Casson Leighton <lkcl@lkcl.net> changed:
What |Removed |Added
----------------------------------------------------------------------------
See Also| |https://bugs.libre-soc.org/
| |show_bug.cgi?id=342
--
You are receiving this mail because:
You are on the CC list for the bug.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Cole Poirier @ 2020-05-23 22:59 UTC (permalink / raw)
To: Libre-RISCV General Development; +Cc: Libre-RISCV General Development
In-Reply-To: <CAPweEDxzR2-eca=NUvg32GLE+HCBfb7b02z_oceGzmVmAAC0kA@mail.gmail.com>
On May 23 2020, at 3:36 pm, Luke Kenneth Casson Leighton <lkcl@lkcl.net> wrote:
> ok so i sorted the missing files that i'd forgotten to commit. that
> unblocks (at least) 2 people from proceeding. whew. ok now what.
>
> oh i know. i got one.
>
> can you look at soc/fu/compunits.py and add some extra imports which
> create the following classes:
>
> * BranchFunctionUnit
> * ShiftRotFunctionUnit
> etc. etc.
>
> it should be blindingly obvious what to do.
>
> should keep you occupied for all of ooo 5 minutes whilst i think.
Woohoo! Finally finished a piece of code! I did the above and
commit-pushed it. Have a social function to attend to now, if you think
of something for me to do please post it here and I will try it in the morning.
Cole
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
* Re: [libre-riscv-dev] daily kan-ban update 23may2020
From: Luke Kenneth Casson Leighton @ 2020-05-23 23:01 UTC (permalink / raw)
To: Libre-RISCV General Development
In-Reply-To: <0961ED2D-D6C5-4A7D-9F34-95EEDE121987@getmailspring.com>
On Sat, May 23, 2020 at 11:59 PM Cole Poirier <colepoirier@gmail.com> wrote:
> > should keep you occupied for all of ooo 5 minutes whilst i think.
>
> Woohoo! Finally finished a piece of code!
aaawesome.
> I did the above and
> commit-pushed it. Have a social function to attend to now, if you think
> of something for me to do please post it here and I will try it in the morning.
enjoy. willdo.
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev
^ permalink raw reply
page: next prev latest
Libre RISC-V Mailing list Archives (accessible via public-inbox)
Archives are clonable: git clone --mirror https://inbox.libre-soc.org/libre-riscv-dev
Example config snippet for mirrors
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git