[libre-riscv-dev] RISCV-V Extension

[libre-riscv-dev] RISCV-V Extension

[Yehowshua]

It seems pretty similar to SimpleV.
Register Length agnostic vector instructions that then get unrolled onto hardware as necessary.

https://gms.tf/riscv-vector.html <https://gms.tf/riscv-vector.html>

Yehowshua
_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev

Re: [libre-riscv-dev] RISCV-V Extension

[Luke Kenneth Casson Leighton]

On Wed, May 20, 2020 at 5:31 PM Yehowshua <yimmanuel3@gatech.edu> wrote:
>
> It seems pretty similar to SimpleV.

yes.  i tracked what they were doing, and based VL, SUBVL, predication
etc. and many other aspects: data-dependent fail-on-first and so on.

> Register Length agnostic vector instructions that then get unrolled onto hardware as necessary.

actually the assumption is that there are hardware "lanes" and that if
there is a mismatch between VL (=2, =3) and the "Lanes" (4) those
non-matching "Lanes" run empty.

this is a fundamental design assumption, that although setting VL
*requests* a number of elements to be processed, the hardware does not
have to do exactly what is requested: it may assign any non-zero
*actual* VL.

luckily all loop assembly code is specifically designed to be
independent of what the hardware actually sets VL to on any given
loop.

l.

_______________________________________________
libre-riscv-dev mailing list
libre-riscv-dev@lists.libre-riscv.org
http://lists.libre-riscv.org/mailman/listinfo/libre-riscv-dev